HMI PLC All-in-one Integrated Controller 4.3" Touch Panel Relay Output Digital 12DI 12DO RS232 0-10V 0-20mA Temperature Sensor

1X 4.3'' HMI+PLC All-in-one Controller
1X Free  PLC Programming Cable
1X Free Type-C HMI Download Cable

TIPS:
No Analog: Without Analog
4pcs  0-10V :  4PCS  0-10V  Analog Input,  2PCS 0-10V Analog  Output
4pcs  0-20mA :  4PCS  0-20mA   Analog Input,  2PCS 0-20mA   Analog  Output
2pcs  NTC 10K :  4PCS  NTC 10K  Analog Input,  2PCS 0-10V Analog  Output
2  K Thermocouple:  4PCS  K  Thermocouple  Analog  Input,  2PCS 0-10V Analog  Output


Electric Parameter:
Input voltage: DC 24V

Parameters of HMI Part:
Display Size: 4.3inch (97*56mm)
Cutout Size: 134*102*34mm
Resolution: 480*272 pixels
Installation:Clip installation
RAM: NOR Flash 8MB
ROM: 64MB
CPU: 32bit CPU 408MHz
Download Port: Type-C
Display Language: Chinese and English
Software: mView 
Click Here To Download

Parameters of PLC Part:

Analog Input:  0-10V/ 0-20mA / TCN 10K Thermistor / K Thermocouple
K Thermocouple temperature detection : Max 999.9℃
NTC temperature detection range: -40-109.9℃
Analog Output: 2PCS 0-10V Analog Output
(We can customize 0-20mA, if need, please leave a message)
Accuracy: 12 bits
Digital outputs (DO) type: Relay Output
Digital points: 12DI 12DO
Allowed max current: 5A
Loom voltage: DC/AC24V~220V
Circuit insulation: Relay mechanical insulation
On response time: Approx. 10ms
High speed pulse: Default 4 channles 10KHz
(If you need to control Stepper Servo Motor, please contact us. )
High speed output frequency: Y3-Y0 is 10KHz
(We can customized as 4 channels: Y0/Y1 200KHz, Y2/Y3 100KHz,if need, please contact us)
Output level: Normally open dry contact output, COM port can be connected to positive or negative
Isolation method: Photoelectric coupling
Input resistance: High speed input terminal 3.3KΩ/Ordinary input terminal 4.3ΚΩ
Input is ON: High speed input > 4.5mA/Ordinary input > 3.5mA
Input is OFF: Input < 1.5mA
Filter function: Filter can set from 0-100ms, default as 10ms
High speed counting: 6 single-phase (X0-X5)10KHZ
Input level: COM port connects negative terminal
Working temperature: 0°C~50°C
Relative humidity: 5%~95%RH
Software: Compatible with MITSUBISHI GX8.52 ; GX Developer and GX Works2

 

Manuals:
Click Here To Download
If you have any questions, please contact us directly.

Advantages:
1. Customized HMI PLC all-in-one is the first choice for small and medium-sized automation, 
with multifunctional, stable performance, convenient maintenance, safe and reliable. 
2. Max support 6 analog inputs(7'')and 2 analog outputs, 12 bit precision. 
Analogs can be directly read by registers and for data output. 
3. Support multi-channel high-speed counting and high-speed pulse functions. High-speed counting 
conventional 6 single-phase 10KHz or 2 AB (Z) phase 10KHz; can be specially customized as 6 
single-phase counting 60KHz or 2 AB (Z) phase counting 60KHz; High-speed pulse conventional 4 
channels 10KHz; can be customized as 2 channels 200KHz and 2 channels 100KHz. 
4. The touch panel adopts 32bit CPU, which runs fast. The performance is equivalent to Tk series HMI. 
5. The HMI and PLC can be encrypted separately. PLC password with 12345678 can completely prohibit 
program reading, and cannot modify the clock data. (Note: PLC only supports 8-bit password encryption) 
6. Supports external interruption and watchdog function. 7 inch all-in-one machine can select 1 channel 
to load cell (accuracy is 24 bits) or a CAN communication port. 
7. Applies space 3.81mm pluggable terminal, which is convenient for wiring. 
8. PLC is compatiable with Mitsubishi programming software. HMI uses mView programming software.

Note:
1. Power on after confirmed the voltage (24VDC, >18W) and right wiring to avoid damage. 
2. Avoid wiring or plug the cable with electricity, or it is easy to cause electric shock or circuit damage.
When the product emits odor or abnormal sound, please immediately switch off the power.
While processing screw holes or wiring, do not drop the metal chips and wire head into the ventilation
hole of the controller, which may cause product failure and disoperation. 
3. Do not tie power cables and communication cables together or close and keep them at a
distance of 10cm or more. Strong and weak currents need to be separated and correctly grounded.
In severe interference situations, input and output cables of the communication and high-frequency
signals should use shielded cables to improve anti-jamming performance. The grounding terminal
FG on this unit must be properly grounded to improve the anti-interference ability. 
4.The COM of DI DO (transistor) is common cathode. 
5.Please do not disassemble the product or change the wiring. Or it will possible to cause breakdown,
malfunction, loss, or fire.
6. While installing or disassembling the product, ensure to turn off all power.
Or it may cause malfunction and breakdown.